Request a Quote
Mineral Acids

Hydrochloric Acid Muriatic Acid · HCl · 20° & 22° Baumé

CAS No.7647-01-0

The workhorse mineral acid of steel pickling and pH control — supplied to US buyers the way US plants order it, by the degree Baumé: 20° Bé at around 31% and 22° Bé at 35–36%, in technical and FCC grades.

Chelora Chemicals is a hydrochloric acid supplier and sourcing partner serving steel mills, water-treatment operators and chemical processors across the United States, with a batch COA and SDS on every consignment.

  • 20° & 22° BAUMÉ
  • TECHNICAL & FCC GRADE
  • STEEL PICKLING
  • pH CONTROL & NEUTRALIZATION
  • UN 1789 · CLASS 8
  • NATIONWIDE US DELIVERY
Product Identity Available to order
CAS Number
7647-01-0
EC Number
231-595-7
IUPAC name
Hydrogen chloride
Molecular formula
HCl
Molecular weight
36.46 g/mol
Baumé grades
20° Bé · 22° Bé
Concentration
31% · 35–36% w/w
UN Number
UN 1789
HS Code
2806 10

Note: hydrochloric acid is corrosive and fumes at commercial strength. It requires lined or resistant storage and transport equipment. Confirm exact classification and material compatibility for your shipment with your regulatory affairs team.

36.46g/mol molecular weight
20° / 22°BéBaumé grades supplied
31–36%HCl concentration
UN 1789Class 8 · PG II
Where it sits

From brine to bulk hydrochloric acid

Hydrochloric acid reaches the US market by two routes — direct synthesis from chlor-alkali chlorine, and recovery as the by-product of aromatic chlorination. We supply both the acid and the chemistry around it.

FeedstockRock Salt / BrineNaCl Chlor-alkaliCaustic Soda1310-73-2 SynthesisChlorine + Hydrogen This productHydrochloric Acid7647-01-0 DownstreamAmine hydrochlorides612-83-9

Second route: HCl is recovered as the co-product when benzene is chlorinated to monochlorobenzene and the dichlorobenzenes · neutralization partner: caustic soda

Product overview

What hydrochloric acid is used for

Hydrochloric acid — sold throughout US industry as muriatic acid — is a clear, colorless to pale yellow fuming liquid, a solution of hydrogen chloride gas in water. It is a strong mineral acid: fully dissociated in water, aggressive to most metals, and the cheapest route to a chloride ion at scale.

Its single largest industrial use is steel pickling, where it strips mill scale and oxide from hot-rolled strip before cold rolling or coating. Beyond that it is the default acid for pH control and effluent neutralization, for regenerating cation-exchange resins in demineralization plants, for calcium chloride manufacture, and as the chloride source in making metal chlorides and organic intermediates.

Hydrochloric acid grades we quote against

  • 20° Baumé — around 31% HCl. The standard US commercial grade and the bulk of pickling and pH-control demand.
  • 22° Baumé — 35 to 36% HCl. Higher strength where freight per unit of acid matters, or where the process wants a stronger feed.
  • Technical and FCC grades. FCC to the Food Chemicals Codex for food-contact duty; technical grade for industrial service.
  • Low-iron and low-chlorate specifications. Where the acid touches a product stream rather than a scale layer, or regenerates ion-exchange resin.
  • Related mineral acids from the same desk: sulfuric acid and nitric acid.

Handling character

Hydrochloric acid is corrosive to skin, eyes and most metals, and releases an irritating mist at commercial strength. Full hazard detail is in the Safety section below.

Typical commercial specification · 20° Baumé
ParameterTypical value
AppearanceClear, colorless to pale yellow liquid
HCl content31.0–33.0% w/w
Baumé20° Bé min (22° Bé grade available)
Free chlorine5 ppm max
Iron (Fe)5 ppm max (low-iron grade: 1 ppm)
Sulfate (SO₄)50 ppm max
Residue on ignition0.05% max

Important: the figures above are indicative of commercial material and are offered for planning only. The batch certificate of analysis is the governing document.

Physical & chemical properties
PropertyValue
Physical stateFuming liquid, pungent odor
Molecular weight36.46 g/mol
Density (20° Bé)≈ 1.16 g/cm³ at 20 °C
Freezing point≈ −46 °C at 31%
SolubilityMiscible with water in all proportions
pH< 1 (strongly acidic)
VaporFumes at commercial strength

Physical constants compiled from public reference data for CAS 7647-01-0 at commercial concentration and rounded for readability. Values move with Baumé strength and temperature — treat them as orientation, not as a specification.

Applications

Where US industry puts HCl to work

From mill-scale removal and oil-well acidizing to effluent neutralization, calcium chloride manufacture and chloride chemistry.

Steel pickling & metal finishing

Strips mill scale and oxide from hot-rolled strip before cold rolling, galvanizing or coating. The largest single use of the acid in the United States.

  • 20° Bé commercial grade
  • Bulk tanker and ISO tank
  • Spent-liquor regeneration advice

pH control & water treatment

The default acid for correcting alkaline effluent and process water, in municipal and industrial treatment plants, and for pool pH reduction.

  • Consistent Baumé lot to lot
  • Low-iron grade where color matters
  • Paired with caustic soda

Calcium chloride & chloride chemistry

The cheapest chloride source at scale — calcium and ferric chloride, amine hydrochlorides and organic chlorination.

Ion-exchange regeneration

Regenerates cation resin in demineralization and condensate-polishing plants, where low iron and low chlorate matter.

  • Low-iron specification available
  • Scheduled bulk call-off
  • Full analytical documentation

Oil-well acidizing & mineral processing

Dissolves carbonate rock to stimulate limestone and dolomite formations, usually as a 15–28% inhibited blend, and serves ore-leaching duty.

  • Bulk tanker to field location
  • Inhibitor compatibility noted
  • Technical desk review on request

Food processing · FCC grade

FCC-grade acid for starch hydrolysis, gelatin production, biofuel processing and acidity regulation.

  • Food Chemicals Codex specification
  • Documented batch traceability
  • Trial quantities for qualification
United States coverage

Delivered to US plants and ports

We ship hydrochloric acid to nominated delivery points across the United States. The regions below are destinations we serve — Chelora Chemicals is a sourcing and supply partner, not a US manufacturer, and does not hold US stock.

Gulf Coast

The largest US chemical cluster, and the usual entry point for bulk consignments.

  • Houston & Galveston, TX
  • New Orleans & Baton Rouge, LA
  • Mobile, AL

Northeast

Container and bulk delivery into the mid-Atlantic and New England manufacturing belt.

  • Newark & Elizabeth, NJ
  • Philadelphia, PA
  • Boston, MA

Southeast

Port-side delivery for the Carolinas, Georgia and Florida processing plants.

  • Savannah, GA
  • Charleston, SC
  • Jacksonville, FL & Norfolk, VA

Midwest & Great Lakes

Inland rail and truck forwarding from the nearest coastal port to the industrial Midwest.

  • Chicago, IL
  • Detroit, MI
  • Cleveland & Columbus, OH

West Coast

Pacific routing for West Coast processors and formulators.

  • Los Angeles & Long Beach, CA
  • Oakland, CA
  • Seattle & Tacoma, WA

Southwest & Mountain

Inland delivery to interior states, forwarded from the Gulf or Pacific gateway.

  • Dallas–Fort Worth, TX
  • Phoenix, AZ
  • Denver, CO

Importing into the United States

Hydrochloric acid is a TSCA-regulated chemical substance. Under TSCA section 13 the importer of record, or its authorized agent, must certify to US Customs and Border Protection that each shipment either complies with TSCA or is not subject to it. We confirm the substance's TSCA Inventory status and agree in writing who files that certification before the first consignment moves.

Which party carries that duty follows the Incoterm. On FOB, CFR or CIF terms it is usually the US buyer; on DDP terms it can be the seller or its agent. Safety data sheets and labels are supplied to OSHA's updated Hazard Communication Standard, and the UN 1789 Class 8 transport documentation is prepared before booking.

  • TSCA IMPORT CERTIFICATION
  • OSHA HAZCOM SDS & LABELS
  • UN 1789 · CLASS 8 · PG II
  • US CUSTOMS DOCUMENTATION
US delivery at a glance
ItemHow it works
Delivery pointsAny nominated US plant, terminal or port of discharge
Incoterms quotedFOB · CFR · CIF · DDP
Importer of recordAgreed in writing before the first shipment
TSCA certificationSection 13 positive certification filed at entry
DocumentationBatch COA, SDS, packing list, certificate of origin
Pack formatsJerricans, HDPE drums, totes or bulk tanker

Note: regional coverage describes where we deliver, not where we hold inventory. Lead time depends on producer scheduling and ocean transit to your nominated US port — we confirm both in the quotation.

Buying from Chelora

How we supply hydrochloric acid

Chelora Chemicals is a hydrochloric acid supplier and sourcing partner, not a manufacturer. With a commodity acid the variables that actually bite are Baumé consistency, iron and free chlorine, and whether the receiving equipment matches the acid — that shapes how we select producers on this line.

We place your order with whichever qualified producer best matches your required grade, your price point and your delivery window, and confirm US import requirements before booking.

We keep a second qualified source on this line, so a single-plant disruption never becomes your production problem.

  • Baumé confirmed lot to lot. A pickling line tuned to 22° Bé behaves differently on 20° Bé, so we hold the strength band you specify.
  • TSCA status and import certification settled first. We confirm Inventory status and agree who files the section 13 certification before the first shipment.
  • UN 1789 documentation managed end to end. Class 8 classification, corrosive labeling and carrier compliance confirmed before booking.
  • Equipment compatibility checked before we quote. Rubber-lined, FRP or PE — we confirm the pack and tanker lining suit your offloading point.
  • One desk for the acid set. Order HCl alongside sulfuric acid, nitric acid and caustic soda — and move your spent sulfuric acid out through the same desk.
  • Batch traceability to the producing plant. Full chain of custody documentation on request.
Packing & logistics

Drummed, toted or delivered in bulk

Jerricans, drums, totes or a rubber-lined road tanker — tell us your offloading arrangement and we will quote and classify to it.

Jerricans

35 kg HDPE jerricans

Small-volume packs for laboratory, pilot and low-consumption sites.

Drums

250 kg HDPE drums

Sealed, UN-approved plastic drums where a rigid stackable pack suits your store.

Totes

1000 L IBC totes

Intermediate bulk containers for plants consuming by the tote rather than the tanker.

Bulk road tanker

Rubber-lined / FRP tanker

Bulk delivery to a receiving tank, for pickling lines and treatment plants on continuous draw.

FOB · CIF · CFR · DDP

Incoterms to suit you

Quoted on the Incoterm your purchasing team works to, with documentation filed before booking.

Small trial packs

Trial / sample quantities

Small packs dispatched for process qualification before a commercial order is placed.

Safety, storage & handling

Corrosive and fuming — handle accordingly

Hydrochloric acid at commercial strength burns skin and eyes on contact, attacks most metals, and gives off an irritating mist. The summary below is orientation only — the safety data sheet supplied with your specific batch is the authoritative document.

GHS Signal word: Danger

Classified hazards

  • H290May be corrosive to metals.
  • H314Causes severe skin burns and eye damage.
  • H335May cause respiratory irritation.

Incompatibilities. Never mix hydrochloric acid with hypochlorite or other oxidizers — chlorine gas is released. Keep it away from cyanides, sulfides, carbonates and active metals, and from caustic soda except under controlled neutralization.

Storage

Store in lined or acid-resistant tanks, HDPE drums or FRP vessels in a cool, well-ventilated, bunded area away from oxidizers, alkalis and active metals. Vent to a scrubber where fume accumulation is possible, and keep incompatible acids separated.

Handling

Handle in closed transfer systems with local exhaust ventilation. Wear chemical goggles, a face shield, acid-resistant gloves and apron. Always add acid to water, never the reverse, and have an eyewash and safety shower within immediate reach of the transfer point.

Transport

Shipped as UN 1789, Hydrochloric acid, Class 8, Packing Group II. We confirm and document the exact classification, approved packaging or tanker lining and routing for your specific shipment and destination.

Quality assurance

Every batch, documented

We verify documentation before dispatch so there are no surprises at your incoming-goods bench.

Specification agreed

Baumé band, iron, free chlorine and residue confirmed against your process requirement before order placement.

Producer batch testing

The producing plant tests each batch against the agreed specification before release.

Documentation review

COA, SDS, TSCA certification data and UN 1789 transport paperwork checked by our desk before the shipment is booked.

Traceable dispatch

Each shipment is traceable to its producing batch, with full chain-of-custody records on request.

Production background

How hydrochloric acid is made

Most commercial hydrochloric acid comes from one of two routes. In direct synthesis, chlorine and hydrogen from a chlor-alkali plant are burned together and the hydrogen chloride produced is absorbed into water — the route that gives the cleanest, lowest-iron acid and the one most FCC-grade material comes from.

The second route is recovery. When aromatics are chlorinated — benzene to monochlorobenzene and on to the dichlorobenzenes — one mole of HCl is liberated for every chlorine substituted. That by-product acid is scrubbed, stripped and sold, and it carries a different trace profile from synthetic acid.

Which route a lot came from matters when your process is sensitive to organics or iron, so we confirm the origin and the trace specification before quoting.

We do not publish operating process parameters here; this is background only. Full technical documentation accompanies every shipment, and any process-specific detail you need is best confirmed directly with our technical desk.

Quick reference
Chemical familyStrong mineral acid (hydrohalic)
US commercial grades20° Baumé (31%) and 22° Baumé (35–36%)
Quality gradesTechnical and FCC (Food Chemicals Codex)
ReactivityAttacks most metals; neutralizes bases; forms chloride salts
UpstreamChlor-alkali, aromatic chlorination
Sister acidsSulfuric, nitric, chlorosulfonic
DownstreamCalcium chloride, amine hydrochlorides, pickling liquor
Frequently asked

Hydrochloric acid, answered

What is hydrochloric acid used for?
Hydrochloric acid is used mainly for steel pickling, where it removes mill scale and oxide from hot-rolled strip. It is also the default acid for pH control, water treatment and effluent neutralization, for regenerating cation-exchange resins, for calcium chloride manufacture, for oil-well acidizing and mineral processing, and as the chloride source in making metal chlorides and organic intermediates.
What is 20 degree Baume and 22 degree Baume hydrochloric acid?
Baume is the density scale US industry uses to specify hydrochloric acid strength. 20 degree Baume corresponds to roughly 31% HCl and is the standard commercial grade for pickling and pH control. 22 degree Baume corresponds to about 35 to 36% HCl, which carries more acid per gallon of freight. We quote both, and tell us which your receiving equipment and process are set up for.
What is the difference between hydrochloric acid and muriatic acid?
They are the same chemical. Muriatic acid is the commercial name still widely used in the United States for the technical grade sold for steel pickling, masonry cleaning and pool pH control. It is normally supplied at 20 degree Baume, around 31%. The chemistry, CAS number 7647-01-0 and hazard profile are identical to any other hydrochloric acid.
Do you supply FCC grade hydrochloric acid?
Yes. FCC grade is made to the Food Chemicals Codex specification for food-contact duty such as starch hydrolysis, gelatin production, biofuel processing and acidity regulation. It is available at both 20 and 22 degree Baume. Technical grade covers industrial service where food-contact compliance is not required. Tell us your end use and we will quote against the correct grade.
Is hydrochloric acid hazardous?
Yes. It carries the GHS signal word Danger. It causes severe skin burns and eye damage (H314), may be corrosive to metals (H290) and may cause respiratory irritation (H335) from the mist it gives off at commercial strength. It must never be mixed with hypochlorite or other oxidizers, which releases chlorine gas. The safety data sheet issued with your batch is the authoritative document.
What packing do you offer?
35 kg HDPE jerricans, 250 kg HDPE drums, 1000 liter IBC totes, and bulk delivery by rubber-lined or FRP road tanker and ISO tank. Trial quantities are dispatched for process qualification before a commercial order.
What storage equipment does it need?
Lined or acid-resistant tanks, HDPE or FRP vessels, in a cool, well-ventilated, bunded area. Carbon steel is not suitable. Keep it away from oxidizers, alkalis, cyanides, sulfides and active metals, and vent to a scrubber where fume could accumulate. Confirm material compatibility for your receiving equipment before the first delivery.
Do you supply hydrochloric acid in the United States?
Yes. We deliver to plants, terminals and ports across the United States, including the Gulf Coast, Northeast, Southeast, Midwest, West Coast and Southwest. Chelora Chemicals is a sourcing and supply partner rather than a US manufacturer, so material is placed with a qualified producer and shipped to your nominated US delivery point on the Incoterm your purchasing team works to.
Who is the importer of record for US shipments?
It depends on the Incoterm. On FOB, CFR or CIF terms the US buyer is usually the importer of record; on DDP terms it can be the seller or its agent. The importer of record files the TSCA section 13 import certification with US Customs and Border Protection, so we agree this in writing before the first shipment.
Do you manufacture this yourself?
No - Chelora Chemicals is a supplier and sourcing partner, not a manufacturer. We place your order with whichever qualified producer fits your specification and timeline, and hold a second source in reserve.
Ready to order?

Get a quote on hydrochloric acid

Send us your required Baumé grade, pack format, US delivery point and Incoterm. We will come back with a firm quote, lead time and full documentation — and can price the rest of the acid set in the same inquiry.

Emailsource@cheloragroup.com
Phone / WhatsApp+91 98191 11179
Delivering toAll United States regions
Response timeWithin one business day